Ferrite Pot Magnet
The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the pot magnet makes direct and full flush contact. Pot magnets already lose much of their adhesive force at a distance of only half a millimetre to the ferromagnetic surface. This characteristic is more pronounced in pot magnets than in other ferrite and neodymium magnets.
Product Details
|
Size |
OD: 80mm, ID: 65mm, Thickness: 20mm |
|
Pull force |
500-600N,50KGS |
|
Item number |
YSFM-40 |
|
Material |
SrO or BaO and Fe2O3 |
|
Minimum diatemer |
3mm, with dot or no mark |
|
Shape available |
Block , ring , disc,segment |
|
Purpose |
Science project and DIY, school, work, home,etc. |
Description
Ferrite Pot magnets are a type of magnetic suction parts that excel in specific applications with their economy and applicability. As the most economical solution in the magnetic suction parts product series, ferrite suction parts are still considered as an option to replace NdFeB suction parts in some special uses, despite their lower suction force, especially in outdoor, corrosive and high-temperature applications.
Features
Economy: Ferrite suction parts are the most economical solution among magnetic suction parts, suitable for occasions with limited budgets Applicability: Especially suitable for outdoor, corrosive and high-temperature environments, showing good corrosion resistance and high-temperature resistance
Various models: Provide a variety of models and specifications to meet different application requirements
Application areas Ferrite suction parts are mainly used for installation, fixing, clamping, lifting and moving ferromagnetic workpieces, etc., and are widely used in industrial fields such as engineering, construction, and automobiles, as well as offices, warehouses and other places
These ferrite pot magnets feature a metric internal thread and can be screwed together with objects that have a fitting external thread. They have the same design but a lower adhesive force than neodymium, and the following advantages:
1.Lower cost comparing to Neodymium Pot magnets
2.Reasonable corrosion resistance and holding force
3.High working temperature, withstands up to 250 Deg C
4.Different sizes for different pull force
5.Can be used outdoors
Please note: The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the pot magnet makes direct and full flush contact. Pot magnets already lose much of their adhesive force at a distance of only half a millimetre to the ferromagnetic surface. This characteristic is more pronounced in pot magnets than in other ferrite and neodymium magnets.
When used outdoors, flash rust may develop on the steel pots, but this does not affect the function of the magnets.
Ferrite Pot Magnet With Internal Threaded Bushing
How the ferrite pot magnets with steel pot work: A ferrite magnet is embedded in a steel pot. This metal housing protects the magnet made of ferrite from damage and increases the adhesive force. In order to achieve an optimal adhesive force, the pot magnet must rest directly on the metallic surface. A thin sheet of iron or paint can reduce the adhesive force very quickly. The adhesive force only acts on the open magnet side, since the steel pot shields the magnetic effect.
Special feature: These pot magnets have a threaded bush on the opposite side of it. In the existing internal thread you can e.g. Screw in screws or other parts with an external thread. The maximum operating temperature is 200 ° C.
Due to the ferrite magnet used, the adhesive force is lower than that of the pot magnets made of neodymium. The ferrite pot magnets can still be used at higher temperatures.
The holding magnets / assembly magnets / pot magnets are used particularly often in industry, trade fairs and assembly. The strong pot magnets are also indispensable in the advertising sector / display construction / lighting sector.
Our Advantages
a. Extensive production experience: We are specialized in Permanent magnets with an experience of 20years.
b. Complete production facilities: Everbeen Magnet has acquired the Quality management System Certificate of ISO9001:2015.,SGS.The magnets are made of the best-quality still in accordance with ISO standards.
There are two main inspection steps for neodymium magnet, semi-product inspection and final finished product inspection.Our technicians will do regular scheduled maintenance on these machines to guarantee them work well.
c. High quality raw material: We mainly choose raw material from big magnet powder factory, which are best and largest raw material manufacturer in China.
d. Strict Physical/Chemical testing procedures: Meeting the requirements of the product design and process, providing reliable testing data.
e. Short Delivery time: If one container 15-20 days. We also stock some standard-sized magnet for regular customers
Warm Tips
- Strong magnets may hurt your fingers, so use them carefully.
- Keep away from ID cards, bank cards, watches, etc.
- All magnets may chip and shatter, but if used correctly can last a lifetime.
- If it is damaged, please dispose of it thoroughly. Fragments will still be magnetized, which will cause serious harm if swallowed.
Hot Tags: ferrite pot magnet, China ferrite pot magnet manufacturers, suppliers, factory, innovative ceramic magnet, new ceramic magnet, state of the art ceramic magnet, craft ceramic magnet, sell ceramic magnet, made to order ceramic magnets
Send Inquiry
